POliner Manhole Panel

The information contained on the website www.poliner.eu does not constitute a commercial offer. 
As a manufacturer, POliner may change product specifications without notice.

POliner Manhole Panel is a system of GRP panels intended for the renovation of chimneys and the interior of inspection chambers in sewage systems.

GRP panels are made of glass fiber reinforced polyester resin laminate, where the glass fiber content in the panel ranges from 35% to 60%. The panels are manufactured as thin-walled pipes with a length of 200 – 10,000 mm and a wall thickness of 4 mm (+/- 1 mm), cut along the length. We offer panels in the form of a rolled roll, or in the form of sheets of any size and shape, which are perfect for the renovation of chambers. After installation, the finished product forms a protective surface. Diameter range: DN400 mm – DN2000 mm.

The panels have the National Technical Assessment issued by the Building Research Institute in Warsaw (Poland).

Renovation of the wells using POliner Manhole Panel is carried out by inserting the rolled panel through the manhole cover, unfolding it and attaching it to the surface of the wall of the well / chamber being repaired, maintaining the appropriate thickness of the slot, which is then filled with injection mass. The joint is connected by laminating the edges with a polyester resin.

PARAMETERS

POliner Manhole Panel

Range

DN400 – DN2000

Wall thickness range

4 mm (+/- 1 mm)

Panel lenght

200 mm – 10000 mm

Short-term modulus of elasticity (E0)

PN-EN ISO 178:2011

≥ 10000 MPa

Flexural strength

PN-EN ISO 178:2011

≥ 190 MPa

Flexural stress at break

PN-EN ISO 178:2011

≥ 190 MPa